Living in a climate where it gets both hot and cold in climate requires an adequate Chicago heating and cooling system. The system should keep the house warm during the winter and should keep the house cool during the summer months. It is possible to do some of the heating and cooling maintenance to the system by oneself, but other situations will require the assistance of a Chicago heating and cooling professional. The professional will be able to perform service and make sure that the entire system is operating correctly and efficiently.
There is a basic way that almost all Chicago heating and cooling systems work. The systems usually have three components that enable them to function together to create an effective system. There is a source that has to hot or cold air, a system to distribute the heated or cooled air throughout the house, and a thermostat or control panel that will control the system and the temperature settings of the system.
The source of the air for the heating system is the furnace, and the source of the air for the cooling system is the air conditioning unit. The units usually use the same distribution system to send the air throughout the house.
This is important, because it is better if both of the systems can use the same distribution system since they will not ever need to be used at the same time. This prevents the need for having multiple vents and piping done in the home, but rather makes use of the same distribution system at different times when they each need to be used.If you are having problems in this area, be sure to contact a company that does Chicago heating and cooling, like Besco Air Inc.
The heating and the cooling systems are also usually regulated by the same system, which is the thermostat control panel. This is the panel that controls the temperature settings of the system and will determine if the fan is off or on and if the system is running on automatic temperature control or if it is being controlled manually.
The furnaces and heating systems add heat to the air in order to make the air that is distributed warmer. Instead, the cooling system removes the heat from the air by passing the air over refrigeration coils in order to cool the air before it is distributed throughout the house.
The heating and the cooling units use a fuel or power source in order to run. Generally, the air conditioning system will run on the power of electricity. The furnace is fueled either by electric power or by gas or oil. This air travels over heating panels and heats the air in the home before it is distributed throughout the home.
The air is distributed throughout the home with various different methods. Some systems function solely on gravity and the fact that hot air rises and cools air sinks. Therefore, these systems are not used for air conditioning units but are useful for heating systems.
The air that has been warmed by the heater can be distributed throughout the home by use of gravity. Radiant systems are systems that will heat the walls, floors, or ceilings in the room. They may also heat the radiator in the room, which will distribute the heat into the room.
There are also panels that can distribute the radiant heat. These are not used for air conditioning systems, and they only work well for heating systems. These Chicago heating and cooling radiator systems are generally found in older homes and are not usually installed in buildings that are new and renovated. Chicago heating and cooling comes in many forms that are safe and effective.